Differences

This shows you the differences between two versions of the page.

--- howtos:win32:build [2014/06/22 13:53] – Add tags enrico
+++ howtos:win32:build [2016/08/08 09:23] (current) – Drop old Waf instructions and a redirect to the current build instructions enrico
@@ Line 1: / Line 1: @@
-====== Build Geany on Windows ======
+~~REDIRECT>howtos:win32:msys2~~
-This howto describes how to set up a working build environment on Windows
-to be able to compile, build and test Geany and Geany-Plugins.
-Furthermore, this howto will cover how to create a full Geany release on Windows including
-generating the Windows installers.
-The described setup is quite custom and might not be state-of-art and as clean as it could.
-However, it worked for the author([[users/enrico]]) for years :).
-Be careful about paths: this howto assumes everything is installed on the C: drive of a Windows
-system (tested on Windows XP and 7). Furthermore, most additional dependent libraries and helper
-utilities are installed into c:\libs.
-It is recommended to keep these locations. If you need to change them, be careful and be sure
-to adjust all paths mentioned in the following sections before executing them.
-Also note that in some of the linked helper scripts, the paths are hardcoded, so you need to adjust
-them as well.
-===== Prerequisites =====
-Download and install the following tools
-==== Git ====
-Download and install from http://git-scm.com/download/win
-==== Python ====
-Python is required for the Waf build system and various helper scripts.
-Best to use the x86 (32bit) version of the latest Python 2 installer.
-Download the installer, execute it and follow the instructions (install to c:\python27).
-https://www.python.org/downloads/windows/
-==== Perl ====
-Download and install the Strawberry Perl distribution from http://strawberryperl.com.
-This distribution also includes the mingw-gcc and related tools which will be used to compile Geany later.
-Choose the 32bit installer and install Perl into c:\perl.
-http://strawberryperl.com/
-==== NSIS ====
-To be able to Windows installers for Geany (most probably only interesting for Geany core devs), you need
-the Nullsoft Scriptable Install System (NSIS).
-Download and install NSIS 2.46.
-http://nsis.sourceforge.net/Download
-==== UnxUtils ====
-UnxUtils contain lots of well known and useful tools from a Unix system, compiled for Windows (find, grep, etc.).
-Download the ZIP archive and unpack it to C:\libs\utils
-http://sourceforge.net/projects/unxutils/files/latest/download
-==== GTK+ ====
-And now to the exciting part: GTK+ on Windows.
-The easiest way is to download the whole GTK+ bundle (GTK+2.0, http://www.gtk.org/download/win32.php) and extract it to c:\libs.
-http://ftp.gnome.org/pub/gnome/binaries/win32/gtk+/2.24/gtk+-bundle_2.24.10-20120208_win32.zip
-==== Gettext ====
-Download the following archives and extract them to c:\libs.
-  * http://ftp.gnome.org/pub/gnome/binaries/win32/dependencies/gettext-tools-dev_0.18.1.1-2_win32.zip
-  * http://ftp.gnome.org/pub/gnome/binaries/win32/dependencies/gettext-runtime_0.18.1.1-2_win32.zip
-  * http://ftp.acc.umu.se/pub/gnome/binaries/win32/intltool/0.40/intltool_0.40.4-1_win32.zip
-==== Further dependencies (for geany-plugins) ====
-If you want to compile geany-plugins as well, you need the following dependencies.
-Download the archives and extract them into c:\libs.
-  * http://download.tuxfamily.org/ctpl/releases/ctpl-0.3.2-win32.zip
-  * http://ftp.acc.umu.se/pub/gnome/binaries/win32/libsoup/2.26/libsoup-dev_2.26.3-1_win32.zip
-  * http://ftp.acc.umu.se/pub/gnome/binaries/win32/libsoup/2.26/libsoup_2.26.3-1_win32.zip
-  * http://ftp.acc.umu.se/pub/gnome/binaries/win32/dependencies/libxml2_2.9.0-1_win32.zip
-  * http://ftp.acc.umu.se/pub/gnome/binaries/win32/dependencies/libxml2-dev_2.9.0-1_win32.zip
-  * http://ftp.acc.umu.se/pub/gnome/binaries/win32/dependencies/enchant-dev_1.5.0-2_win32.zip
-  * http://ftp.acc.umu.se/pub/gnome/binaries/win32/dependencies/enchant_1.5.0-2_win32.zip
-=== Lua for Windows ===
-Setting up Lua on Windows in our custom build environment requires a few additional steps.
-  * Download lua-5.1.4_Win32_dll12_lib.zip from http://sourceforge.net/projects/luabinaries/files/5.1.4/Windows%20Libraries/
-  * Extract to c:\libs
-  * Move liblua5.1.* to c:\libs\lib
-  * Create c:\libs\lib\pkgconfig\lua.pc with the following content:
-<code ini lua.pc>
-prefix=c:\libs
-exec_prefix=${prefix}
-libdir=${exec_prefix}/lib
-includedir=${prefix}/include
-datarootdir=${prefix}/share
-datadir=${datarootdir}
-localedir=${datarootdir}/locale
-Name: Lua
-Description: A fast and lightweight IDE using GTK2
-Requires: gtk+-2.0 >= 2.8.0
-Version: 5.1
-Libs: -L${libdir} -llua5.1
-Cflags: -I${includedir}
-</code>
-===== Setup =====
-==== Modify %PATH% ====
-For convenience and a working build system, you need to extend the %PATH% variable, so the newly installed tools will be available
-without typing the whole path every time.
-To do so, open the //Control Panel// and choose //System and Security\System//, then click on the left on //Advanced system settings//.
-In the newly opened dialog, click on //Environment Variables//. In the list of //System variables// search for //Path//.
-Edit it and add the following paths to the end of list (seperated with semicolon):
-<code>
-C:\python27;C:\Program Files (x86)\NSIS;c:\libs\bin;C:\libs\utils\usr\local\wbin;C:\Program Files (x86)\Git\cmd;C:\perl\perl\site\bin;C:\perl\perl\bin;C:\perl\c\bin
-</code>
-It might be some of the paths were already added by some installers. Adding them twice won't hurt but it is always better to check the whole list before saving.
-Then save and close all dialogs.
-To test the new setting, open a new command line window (Start -> Run -> "cmd.exe") and test executing the following commands:
-  * python
-  * perl
-  * wget
-  * pkg-config
-  * makensis
-==== Clone the Geany repository from Github ====
-Before starting with the rest, you need the Geany source code first (and the code of geany-plugins and the extra themes).
-In a command line window, execute the following commands:
-<code>
-mkdir \git
-cd \git
-git clone git://github.com/geany/geany
-git clone git://github.com/geany/geany-plugins
-git clone git://github.com/geany/geany-themes
-</code>
-===== Build and test =====
-==== Build Geany ====
-Now you are ready to compile and build Geany already.
-In a command line window, execute the following commands:
-<code>
-cd \git\geany
-python waf configure
-python waf build
-python waf install
-</code>
-If all went fine, you should have a full Geany for Windows build in \git\geany\geany-1.25 (or whatever is the current version of GIT Master).
-=== Copy include headers for later use ===
-To be able to compile plugins against your current version of Geany,
-you need to copy the header files and the pkg-config file geany.pc to
-c:\libs so that pkg-config and the compiler will find those files.
-To do so easily, you can use the following script to copy the header files and the geany.pc
-pkg-config file to c:\libs.
-<code python copy_headers.py>
-#!/usr/bin/env python
-import os, shutil
-VERSION = '1.25'
-DEST = r'\libs'
-# header files
-shutil.rmtree(r'\libs\include\geany', ignore_errors=True)
-shutil.copytree(r'geany-%s\include\geany' % VERSION, r'%s\include\geany' % DEST)
-# geany.pc
-shutil.copy(r'geany-%s\lib\pkgconfig\geany.pc' % VERSION, r'%s\lib\pkgconfig' % DEST)
-</code>
-==== Build Geany-Plugins ====
-After Geany has been compiled and the headers copied into the target location, you
-should be able to compile Geany-Plugins as well.
-In a command line window, execute the following commands:
-<code>
-cd \git\geany
-python waf configure
-python waf build
-python waf install
-</code>
-Carefully read the output of //python waf configure// and check whether the installed dependencies
-have been found. At the time of writing, it is expected that the following dependencies will not
-be found and/or are not really supported yet:
-  * GpgMe
-  * GtkSpell
-  * PyGTK (an update to this tutorial for building GeanyPy using PyGTK on Windows is planned)
-  * VTE
-  * Vala
-  * WebKit
-If all went fine, you should have the plugins built in \git\geany-plugins\geany-plugins-1.25 (or whatever is the current version of GIT Master).
-==== Test the Geany build ====
-After you have built Geany and Geany-Plugins from source, you might want to run and test it.
-This is a bit tricky but possible.
-=== Initial test setup ===
-Execute the following commands only once:
-  * create directory: c:\git\geany_test
-  * copy everything from c:\git\geany\geany-1.25 to c:\git\geany_test
-  * copy bundled GTK runtine environment to c:\git\geany_test
-  * copy everything from c:\git\geany-plugins\geany-plugins-1.25 to c:\git\geany_test
-  * copy plugins dependencies from c:\git\geany-plugins\contrib to c:\git\geany_test
-=== Usage ===
-Save the following script to \git\geany\
-<code winbatch _geany_test.bat>
-cd c:\git\geany\
-copy _build_\geany.exe c:\git\geany_test\bin\
-xcopy /Y _build_\*.dll c:\git\geany_test\lib\
-cd c:\git\geany-plugins\
-for /F "usebackq" %%i in (`dir /s /b _build_\*.dll`) do copy %%i c:\git\geany_test\lib
-# cleanup
-rm c:\git\geany_test\lib\libgeanylua.dll
-cd c:\git\geany_test\bin\
-geany.exe -v --socket-file ..\_geany_config\mysocket -c ..\_geany_config
-</code>
-Then whenever you want to test a Geany build, run _geany_test.bat from \git\geany.
-===== Release Geany and Geany-Plugins =====
-==== Release Geany ====
-  * edit release.py and update VERSION constant
-  * check for a clean working copy (e.g. no uncommitted changes)
-  * clean and build (adjust versions as necessary):
-<code>
-rmdir /S geany-1.24
-python waf clean
-git pull
-python waf configure --no-scm
-python waf build
-python waf install
-python release.py
-</code>
-  * Party!
-==== Release Geany-Plugins ====
-  * edit: release.py and update VERSION constant
-  * check for a clean working copy (e.g. no uncommitted changes)
-  * clean and build (adjust versions as necessary):
-<code>
-rmdir /S geany-plugins-1.24
-python waf clean
-git pull
-python waf configure --no-scm
-python waf build
-python waf install
-python release.py
-</code>
-  * Party!
-====== TODO ======
-  * document and provide stripped GTK bundle
-  * document and provide plugins contrib
-  * document release process in detail
-  * document PyGTK installation
-{{tag>howto win32 build}}

Trace:

Differences

Search

Navigation

Print/export

Tools